FHSPWC205-16G Peer
The FHSPWC205-16G Peer is a matched bearing and housing assembly designed for reliable and easy installation. The housing simplifies the assembly of the bearing and shaft, providing support and protection for the bearing to extend its lifespan and make maintenance easier.
623ZZ VA L55 Horst Weidner GmbH
The 623ZZ VA L55 Horst Weidner GmbH is a stainless steel deep groove ball bearing designed for environments with moisture or chemicals, such as the food, pharmaceutical, and chemical industries. It can withstand high temperatures and is corrosion-resistant. While it has slightly lower load carrying capacities compared to chrome-steel bearings, it shares similar characteristics with standard deep groove ball bearings. This single-row bearing has a simple, sturdy design, requires minimal maintenance, and is ideal for accommodating radial loads and limited axial loads in both directions.
SNH506-605 HCB Hacibali Turkey
Enhance your industrial operations with the robust SNH506-605 HCB Hacibali Turkey housing. Specifically designed for bearings with higher load ratings, this housing simplifies installation, offers support and protection to bearings, and improves maintenance efficiency. Extend the lifespan of your bearings while reducing costs with this convenient solution.
UCFL210E JIB
The UCFL210E JIB housing unit is a reliable bearing and housing assembly. Its components are matched for easy installation and reliable operation, providing support and protection that extends the bearing's lifespan.
SA30C LS
The SA30C LS is a versatile rod end designed with a spherical plain bearing, housing, and integral shank. It is commonly used at the end of hydraulic or pneumatic cylinders, and to connect two shafts, offering the ability to accommodate misalignment and support radial forces. The spherical plain bearing has a steel-on-PTFE sliding contact, ensuring maintenance-free operation. Its PTFE materials create a smooth surface during the run-in period, allowing perfect component fit.
SSUCFL207 LDI
The SSUCFL207 LDI is a complete housing unit with a stainless steel bearing and housing assembly, designed for reliable and low-maintenance operation. Its corrosion resistance and durability make it suitable for use in diverse environments.
UCFA210 TR
The UCFA210 TR housing unit is designed for reliable operation, with matched components that are ready for easy installation. The housing simplifies bearing and shaft installation, providing support and protection to extend the bearing's lifespan and make maintenance easier.
51201 FBJ
The 51201 FBJ is a single-direction thrust ball bearing, designed with an open structure for high rotational speeds. It consists of a shaft ring, housing ring, and ball and cage assembly. These bearings can only handle axial loads in one direction, preventing radial loading on the shaft. They are disassemblable and allow for separate mounting of components, but caution must be taken to avoid mixing up the shaft and housing rings during assembly. The bearing's housing ring has a flat seat, which means it cannot compensate for misalignment between the shaft and housing.
51215 FBJ
The 51215 FBJ is a type of single direction thrust ball bearing, also known as a ball thrust bearing or axial deep groove ball bearing. It consists of a shaft ring, a housing ring, and a ball and cage assembly, making it suitable for high rotational speeds due to its open design. These bearings can only handle axial loads in one direction, locking the shaft in place. However, they should not be loaded radially. The shaft ring rotates with the shaft, while the housing ring has a slightly larger bore diameter to allow clearance for the shaft. As they can be disassembled, the components of thrust ball bearings can be mounted separately. During assembly, it's important to avoid mixing up the shaft and housing rings. The housing ring of the 51215 FBJ has a flat seat and cannot compensate for misalignment between the shaft and housing.
51217 FBJ
The 51217 FBJ is a single direction thrust ball bearing, designed for high rotational speeds. It consists of a shaft ring, housing ring, and ball and cage assembly with an open design. It can only handle axial loads in one direction, preventing radial loads. The bearing is easily disassembled for separate component mounting, but caution is needed to avoid mixing up the shaft and housing rings during assembly. As the housing ring has a flat seat, this bearing cannot compensate for misalignment between the shaft and housing.
1216K FBJ
The 1216K FBJ is a double-row self-aligning deep-groove ball bearing that is designed without a seal. Its unique construction with both rows housed in a spherical raceway in the outer ring allows for self-alignment, ensuring that any misalignment of the shaft does not affect performance. This makes it ideal for applications with substantial misalignment or shaft deflections. Additionally, these bearings have low friction and can handle high radial loads, with the capability to handle limited axial loads in both directions.
2209 FBJ
The 2209 FBJ is a double-row self-aligning deep-groove ball bearing, known for its ability to tolerate misalignment and shaft deflections without affecting performance. Its spherical raceway construction enables self-alignment and low friction, making it suitable for applications with substantial misalignment or high shaft deflections. Additionally, these bearings can handle high radial loads and limited axial loads in both directions, while producing only limited frictional heat even at higher speeds.
2211K FBJ
The 2211K FBJ is a double-row self-aligning deep-groove ball bearing without a seal, offering superior performance in applications with substantial misalignment or shaft deflections. Its unique construction allows for self-alignment, ensuring minimal friction and the ability to handle high radial loads while also accommodating limited axial loading in both directions.
2206K FBJ
The 2206K FBJ is a double-row self-aligning deep-groove ball bearing known for its ability to accommodate substantial misalignment and shaft deflections without compromising performance. Its unique double-row construction and spherical outer ring raceway enable self-alignment, making it suitable for applications with potential shaft misalignment. Additionally, these bearings are low-friction, capable of handling high radial loads, and can withstand limited axial loads in both directions, making them suitable for a variety of applications.