FLH208 NSK
The FLH208 NSK housing is a convenient and protective solution for installing insert bearings (sold separately). It simplifies the installation process and supports the bearings, enhancing maintenance and prolonging their lifespan. It is compatible with insert bearings, which are easy to install and disassemble.
2212K C3 NSK
The 2212K C3 NSK is a double-row self-aligning deep-groove ball bearing with a spherical raceway in the outer ring, allowing it to self-align. It is ideal for applications with substantial misalignment or shaft deflections and has low friction, making it suitable for high-speed operation. This bearing can handle high radial loads and some axial loads in both directions.
51408 Steyr
The 51408 Steyr is a single-direction thrust ball bearing, consisting of a shaft ring, housing ring, and ball and cage assembly. With an open design and high rotational speed suitability, it can only be loaded axially in one direction to lock the shaft. These bearings are easily disassembled and must not be radially loaded. Note that the housing ring has a flat seat and cannot compensate for misalignment between the shaft and housing.
2203 NSK
The 2203 NSK is a double-row self-aligning deep-groove ball bearing designed without a seal. Its spherical raceway in the outer ring allows for self-aligning capabilities, making it suitable for applications with substantial misalignment or shaft deflections. With low friction and the ability to handle high radial loads, these bearings are a reliable choice for various industrial uses.
HR30208J NSK
The HR30208J NSK is a single-row tapered roller bearing, named for its tapered rollers between the inner and outer rings. Its conical raceways allow it to accommodate combined loads, supporting high radial and axial loads in one direction. Its design enables easy disassembly and reassembly, featuring a combination of a cup and a cone unit with an inner ring, cage, and roller set. These versatile bearings have an open design and can be mounted in mirror-image or paired sets in various arrangements.
1208 NTN
The 1208 NTN bearing is a double-row self-aligning deep-groove ball bearing, featuring a spherical raceway in the outer ring that allows it to be self-aligning, making it ideal for applications with substantial misalignment or shaft deflections. Additionally, it has low friction, can handle high radial loads, and is capable of withstanding limited axial loads in both directions.
55187C Bower
Upgrade your equipment with the 55187C Bower, a removable cone that forms the inner ring and rollers of a single-row tapered roller bearing. When paired with a separate cup, this combination creates a complete tapered roller bearing. The conical raceways and tapered rollers are designed to efficiently absorb radial and axial forces in one direction, preventing sliding movements and minimizing wear. Conveniently separable, the cone and cup enable easy mounting and adjustment of axial clearance or preload during assembly. For optimal performance and to avoid potential issues, it's recommended to replace both components at the same time and to use a matching cup from the same manufacturer.
HM88610 A&S - Fersa
The HM88610 A&S - Fersa is an outer ring cup that, when combined with a compatible cone, forms a single-row tapered roller bearing, capable of handling radial and axial forces. With conical raceways and roller elements, it minimizes wear and allows for easy adjustment of axial clearance or preload during assembly. For optimal performance, it is advisable to replace both the cone and cup at the same time, preferably from the same manufacturer to prevent compatibility issues.
31309V B22 SNR
The 31309V B22 SNR is a versatile single-row tapered roller bearing designed to accommodate combined loads, including high radial and axial loads in one direction. Its conical raceways and tapered rollers between the inner and outer rings ensure efficient load distribution. This bearing is easy to assemble and disassemble, consisting of a cup and a cone. It is also designed for use in paired bearing sets, allowing for various mounting arrangements.
32207B SNR
The 32207B SNR is a versatile single-row tapered roller bearing designed to accommodate combined loads. Its conical raceways and tapered rollers between the inner and outer rings allow it to support high radial and axial loads in one direction. This bearing is easily (dis)assembled and comes in a combination of a cup and a cone. It has an open design and can be mounted in pairs for increased load capacity and flexibility in arrangements.
16284 NSK
The 16284 NSK is an outer ring cup designed for use with a single-row tapered roller bearing. When combined with a compatible cone, it creates a complete tapered roller bearing capable of absorbing radial and axial forces in one direction. The conical raceways and roller elements contribute to this design's ability to withstand both types of forces, with the axial load capacity increasing as the angle between the outer ring and the bearing's center line grows. The geometric features of the tapered roller bearings prevent sliding movements between the raceways and rollers, minimizing component wear. However, it is important to ensure a minimum load for proper operation. The separable cone and cup can be easily mounted and allow for adjustment of axial clearance or preload during assembly. To ensure reliable operation, it is best to replace the cone and cup simultaneously, and to use components from the same manufacturer to avoid potential bearing problems arising from differences in internal bearing profiles, materials, and tolerances. For optimal performance, always pair the 16284 NSK cup with a matching cone from the same manufacturer.
SS695 GRW Gebr. Reinfurt
The SS695 GRW Gebr. Reinfurt is a durable and corrosion-resistant stainless steel deep groove ball bearing, ideal for environments with moisture or chemicals such as the food, pharmaceutical, and chemical industries. These bearings also withstand high temperatures but have slightly lower load capacities compared to chrome-steel bearings. With a simple and robust design, they require minimal maintenance and are suitable for accommodating radial loads and, to a lesser extent, axial loads in both directions.
6535 Tyson
The 6535 Tyson is an outer ring designed for a single-row tapered roller bearing when combined with a separately available cone. With conical raceways on the inner and outer rings and conical roller elements, this design allows the bearing to handle radial and axial forces in one direction. The angle between the outer ring and the bearing center line determines its axial load capacity. The geometry of tapered roller bearings minimizes sliding movements, reducing wear. Proper bearing operation requires a minimum load, and the separable cone and cup enable easy mounting and adjustment of axial clearance or preload during assembly. For reliable operation, it is recommended to replace both the cone and cup at the same time, and to use components from the same manufacturer to prevent bearing problems arising from differences in profiles, material, and tolerances. Always pair the 6535 Tyson with a matching cone from the same manufacturer.
UKFL205D1 Nachi
Experience reliable and hassle-free operation with the UKFL205D1 Nachi housing unit. This complete set is plug-and-play, making installation a breeze. The housing not only simplifies the installation process but also provides support and protection for the bearing, ultimately prolonging its lifespan and making maintenance effortless.
UKFL206JD1 NTN
The UKFL206JD1 NTN is a ready-to-use housing unit designed for reliable and easy installation. Its components are carefully matched to ensure dependable operation. The housing simplifies bearing and shaft installation while providing support and protection. This setup eases maintenance and prolongs the bearing's lifespan.
2213K.2RS.TV.C3 SLF Fraureuth
The 2213K.2RS.TV.C3 SLF Fraureuth is a double-row self-aligning deep-groove ball bearing with double-sided seals. Its construction allows it to be self-aligning, making it suitable for applications where substantial misalignment or shaft deflections may occur. With low friction and high load-bearing capacity, it is ideal for handling radial loads and limited axial loads in both directions, even at higher speeds.