51222 NKE
The 51222 NKE is a single direction thrust ball bearing, also known as a ball thrust bearing or axial deep groove ball bearing. It consists of a shaft ring, a housing ring, and a ball and cage assembly, making it suitable for high rotational speeds. These bearings can only handle axial loads in one direction, and caution should be taken not to load them radially. The housing ring has a slightly larger bore diameter to allow clearance for the shaft. It comes with a flat seat and cannot compensate for misalignment between the shaft and housing.
382A A&S - Fersa
The 382A A&S - Fersa is an outer ring that, when paired with a separately available cone, forms a complete tapered roller bearing. Its conical raceways and roller elements allow it to handle radial and axial forces. These bearings prevent sliding movements and minimize wear, but require a minimum load for operation. The separable design allows for easy mounting and adjustment of axial clearance or preload. For reliable operation, it's best to replace both the cone and cup at the same time, preferably from the same manufacturer. Always use a matching cone from the same manufacturer with the 382A A&S - Fersa.
2310C3 NSK
The 2310C3 NSK is a double-row self-aligning deep-groove ball bearing designed without a seal. Its unique construction allows for self-alignment, making it ideal for applications with shaft misalignment or deflection. With low friction and the ability to handle high radial loads, this bearing is suitable for various industrial uses.
4T-55200C PX1 NTN
The 4T-55200C PX1 NTN is a cone for a single-row tapered roller bearing, composed of the inner ring and rollers. When paired with a compatible cup (outer ring), these parts form a complete bearing capable of handling radial and axial forces. The specialized design minimizes wear and allows for easy adjustment during assembly. For optimal performance, always use components from the same manufacturer and replace the cone and cup together.
T19175 Fafnir
Enhance your bearings with the T19175 Fafnir housing. This designed housing simplifies bearing and shaft installation, providing essential support and protection. Improve maintenance efficiency and extend bearing lifespan with a matching, easy-to-install bearing.
F15113 A&S - Fersa
The F15113 A&S - Fersa is a removable cone designed for a single-row tapered roller bearing. It consists of the inner ring and rollers, and when paired with a compatible cup (outer ring), it forms a complete tapered roller bearing. The conical raceways on the inner and outer rings, along with tapered rollers, allow for absorption of radial and axial forces in one direction. The design of tapered roller bearings prevents sliding movements, minimizing wear. Proper bearing operation requires a minimum load. The separable cone and cup make for easy mounting, and the axial clearance or preload can be adjusted during assembly. For reliable operation, it's best to replace the cone and cup at the same time and use components from the same manufacturer to prevent bearing problems caused by internal profile differences, material variations, and tolerances. Match the F15113 A&S - Fersa with a compatible cup from the same manufacturer for optimal performance.
FLE204 SNR
Upgrade your bearing system with the FLE204 SNR housing, specially designed to simplify bearing and shaft installation. This housing provides essential support and protection for the bearings, improving maintenance efficiency and extending their lifespan. Pair it with an easy-to-install matching bearing to complete your setup. The FLE204 SNR housing is suitable for use with insert bearings, designed based on single-row deep groove ball bearings. These insert bearings are easy to disassemble and assemble, featuring a widened inner ring, solid outer ring, ball bearing cage, and seals.
30306DG5 NSK
The 30306DG5 NSK is a high-capacity single-row tapered roller bearing designed to accommodate combined loads with its conical raceways and tapered rollers. This versatile bearing supports high radial and axial loads in one direction, with greater axial load capacity as the contact angle increases. It is easy to assemble and disassemble, consisting of an inner ring with cage and roller set (cone) and an outer ring (cup). The open design requires it to be mounted in a mirror-image arrangement with a second tapered roller bearing or in paired sets in various arrangements (X, O, or tandem).
M-C-UCF210D1 NTN
Enhance your bearing system with the F210D1 NTN housing, designed to simplify the installation of insert bearings while providing essential support and protection. This housing helps to streamline maintenance and extend the lifespan of your bearings. It is suitable for use with insert bearings, which are easy to install and maintain due to their simple design based on single-row deep groove ball bearings.
UCT218 Asahi
The UCT218 Asahi is a reliable and easy-to-install housing unit with matched components for smooth operation. The housing simplifies bearing and shaft installation, providing support and protection for the bearing, making maintenance easier and extending its lifespan.
UKP210D1 NSK
The UKP210D1 NSK is a reliable housing unit, specifically designed to support and protect bearings for easy installation and maintenance. This complete assembly set is ready for immediate use, promoting extended bearing lifespan and hassle-free maintenance.
UCFE207 SNR
The UCFE207 SNR is a reliable and easy-to-install housing unit, designed to provide support and protection to the bearing. This complete set simplifies installation and maintenance, ultimately extending the bearing's lifespan.
ESFLE206 SNR
The ESFLE206 SNR housing unit offers reliable and easy-to-install bearing and housing components. This complete set simplifies installation and maintenance, supporting and protecting the bearing for an extended lifespan.