YF207-20 Frimet
Introducing the YF207-20 Frimet housing unit. This carefully matched bearing and housing assembly ensures reliable operation, providing an easy and ready-to-use solution for installation. The housing streamlines bearing and shaft installation, offering support and protection for the bearing, making maintenance easier and extending its lifespan.
MS14104-4 Heim
The MS14104-4 Heim is a high-capacity spherical plain bearing with a steel-on-steel sliding contact. Its two-piece design, consisting of inner and outer rings, enables it to accommodate misalignment and carry heavy loads. The steel construction makes it wear-resistant and suitable for high loads, but regular maintenance and proper lubrication are necessary to prevent friction and corrosion.
51108 ISB
The 51108 ISB is a single direction thrust ball bearing designed for high rotational speeds. It consists of a shaft ring, housing ring, and ball and cage assembly, making it suitable for axial loads in one direction and not for radial loads. Easy to disassemble, it can be mounted separately, but caution must be taken not to mix up the shaft and housing rings during assembly. The housing ring has a flat seat, so it does not compensate for misalignment between the shaft and housing.
B819X-P5P-G48 RMB
The B819X-P5P-G48 RMB is a single direction thrust ball bearing, designed for high rotational speeds. Its open design allows for easy disassembly and separate component mounting. The shaft and housing rings must be properly aligned during assembly to ensure proper function. These bearings are suitable for axial loading only, and caution should be taken to avoid radial loading.
LM12749/LM12710 KBC
The LM12749/LM12710 KBC is a versatile single-row tapered roller bearing with conical raceways that accommodates combined loads, supporting both high radial and axial loads in one direction. Its easy-to-assemble design consists of a cup and a cone, with the inner ring, cage, and roller set forming the cone unit and the outer ring forming the cup. To function effectively, it must be mounted in mirror-image arrangement with a second tapered roller bearing or utilized in paired bearing sets in various arrangements.
UCP203 PTI
The UCP203 PTI is a reliable and easy-to-install housing unit for bearings. Its components are matched for smooth operation, while the housing simplifies installation of the bearing and shaft. With added support and protection, maintenance is made easier while extending the bearing's lifespan.
GEZ100E S LDK
The GEZ100E S LDK is a two-piece spherical plain bearing with a high load carrying capacity and ability to accommodate misalignment. It is constructed with a steel-on-steel sliding contact, providing wear resistance and a high load capacity. Regular maintenance and proper lubrication are necessary to reduce friction and prevent fouling and corrosion.
UCVP207JS6 FYH
The UCVP207JS6 FYH is a reliable and easy-to-install housing unit that is specifically designed to support and protect bearings. Its matched components ensure reliable operation and make maintenance a breeze, extending the lifespan of the bearing.
2209K ZKL
The 2209K ZKL is a double-row self-aligning deep-groove ball bearing designed without a seal. Its construction allows for self-alignment, ensuring that any misalignment of the shaft relative to the bearing housing does not affect performance. This makes it suitable for applications with substantial misalignment or shaft deflections. Additionally, self-aligning bearings have low friction, even at higher speeds, and can handle high radial loads and limited axial loads in both directions.
2309K ZKL
The 2309K ZKL is a double-row self-aligning deep-groove ball bearing designed without a seal. Its unique construction allows for self-alignment, making it suitable for applications with substantial misalignment or shaft deflections. These bearings have low friction, minimal heat generation even at higher speeds, and can handle high radial loads with some axial loading capacity.
2310 Rollway
The 2310 Rollway is a double-row self-aligning deep-groove ball bearing that doesn't have a seal. It features two rows housed in a spherical raceway in the outer ring, allowing for self-alignment and optimal performance even with shaft misalignment. This makes it ideal for applications with substantial misalignment or shaft deflections. Additionally, these bearings have the lowest friction among rolling-element bearings, generating limited frictional heat even at high speeds. They can handle high radial loads and to a lesser extent, can be axially loaded in both directions.
32309A URB
The 32309A URB is a versatile single-row tapered roller bearing with conical raceways, designed to accommodate combined loads, high radial and axial loads in one direction. Its easy-to-assemble construction consists of a cup and cone unit, featuring an inner ring with cage and roller set, and an outer ring. The open design requires mounting in a mirror-image arrangement with a second tapered roller bearing or in paired sets in X, O, or tandem arrangements for optimal performance.
51112 FBJ
The 51112 FBJ is a single direction thrust ball bearing, designed for high rotational speeds. It consists of a shaft ring, housing ring, and a ball and cage assembly. These bearings are suitable for axial loads in one direction only, preventing radial loading. The bearings can be disassembled and easily mounted separately, but caution should be taken not to mix up the shaft and housing rings during assembly. The flat seat of the housing ring means this bearing cannot compensate for misalignment between the shaft and housing.
IR100 IRB Rolamentos
The IR100 IRB Rolamentos is a single direction thrust ball bearing, featuring a shaft ring, housing ring, and a ball and cage assembly. This open-design bearing is suitable for high rotational speeds and can only be loaded axially in one direction. It can be disassembled for easy mounting, but care must be taken not to mix up the shaft and housing rings during assembly.
51307 CFC
The 51307 CFC is a single direction thrust ball bearing designed for high rotational speeds. It consists of a shaft ring, housing ring, and ball and cage assembly. These bearings can only be loaded axially in one direction, allowing a shaft to be locked in place. They have an open design and are not suitable for radial loads. The components can be easily disassembled and mounted separately. However, it's important to avoid mixing up the shaft and housing rings during assembly. The housing ring has a flat seat and cannot compensate for misalignment between the shaft and housing.