Hatteland HD 19T22 MMD-MA1-FAGA 19.0″ MMD ACDC Black GDC Buzzer 119910

Availability: Out of stock Category: Tag:

Product Description

The HD 17T21 STD-MA1-FAGA is a 17.0-inch industrial display by Hatteland Display AS, offering a high-quality TFT with LED backlight and a native resolution of 1280×1024. Designed for professional maritime use, it provides reliability, longevity, and flexibility with options like multi-touch screen and optical bonding. It supports a variety of signal inputs and features a multi-power supply, accommodating both AC and DC power sources. Its rugged design includes IP66 front protection, making it suitable for demanding environments. Accessories and factory options like capacitive touch screens and optical bonding technology are available to enhance functionality.

Additional information

Product Specifications

TFT Technology

  • High Quality TFT with LED Backlight
  • 19.0 inch viewable image size, Aspect Ratio 5:4
  • TFT active-matrix liquid crystal panel
  • MVA (Multi-domain Vertical Alignment) LCD Techonology

TFT Characteristics

Native Resolution 1280 x 1024
Pixel Pitch (RGB) 0.294 (H) x 0.294 (V) mm
Light Intensity High Bright 1000 cd/m² (typical)
Response Time 20ms (typical), “black” to “white”
Contrast Ratio High Bright 1000:1 Typical
Contrast Ratio 1500:1 (typical)
Light Intensity 350 cd/m² (typical)
Light Intensity High Bright 1000 cd/m² (typical)
Viewable Angle +/- 85 deg. (typical) (Up/Down/Left/Right)
Viewable Angle High Bright +/- 89 deg. (typical) (Up/Down/Left/Right)
Active Display Area 336.32 (H) x 270.336 (V) mm
Max Colors 16.7 million

Digital Separate Synchronization

  • Composite Synchronization
  • Synchronization on Green
  • Auto detects VGA -> SXGA, interlaced and non-interlaced

Synchronization Range

Horizontal: 31.5 kHz to 91.1 kHz
Vertical: 60 Hz* to 85 Hz

* Recommended for optimal picture quality

Supported Signals:

Resolutions:

VGA 640 x 480 (including 640 x 350)
SVGA 800 x 600 (including 720 x 400)
XGA 1024 x 768
SXGA 1280 x 1024

Vedio Signals

  • Interlaced HDTV, NTSC, PAL and SECAM video
  • Composite video

Power Specifications

Multi-power Supply

  • 115&230VAC – 50/60Hz + 24 VDC

Note: You may connect either AC power or DC power or both. In case both sources
are connected, power will be sourced from the AC input. If AC input is lost, there will
be a uninterrupted switch-over to DC input.

Power Consumption

  • Operating AC/DC: 22W (typ) – 60W (max)

Physical Considerations

  • Width: 390.00 mm (15.35 inches)
  • Height: 351.00 mm (13.82 inches)
  • Depth: 73.50 mm (2.89 inches)
  • 4 x M6 VESA mounting 280x150mm , Maximum depth: 12mm
  • Weight: TBDkg / TBDlbs

Signal Terminals

Port Name Description
DVI-I IN 2 * 29p DVI Female (or as VGA IN with adapter)
DP1.2 IN Comp. Video IN : 1 x 20p DisplayPort (female) : 2 x BNC Connector (female)
SCOM RS-422/485 2 x 5-pin Terminal Block 3.81, non-isolated+Buzzer VGA OUT : 1 x 15p HD D-SUB (female) – Clone of VGA IN
SCOM+Touch 1 x USB TYPE A Connector (female)
Ethernet 1 x RJ45 Connector for Remote Control
SCOM RS-232 1 x 9p D-SUB (female) non-isolated+Buzzer
Potmeter/User 1 x 9p D-SUB (male) (Potentiometer IN, +5VDC OUT, BRT +/-IN)
AC Power IN 1 x Std IEC Inlet
DC Power IN 1 x 2-pin Terminal Block 5.08

DVI-I Port #1 as VGA IN also acts as clone to VGA Signal Out (buffered). **Tested at recommended resolutions. The VGA
output signal (buffered) is at same resolution and sync as the VGA input. The output is working even if the display unit is turned off, but power cable/supply must be connected/provided.

User Controls

  • Power On/Off, On Screen Display Menu, Brightness Control (-/+)
  • Hotkeys (left/right)
  • Mode Status Indicators (ECDIS, Service)
  • Buzzer (not visible), Light Sensor (not visible)

Environmental Considerations

Operating Temperature: -15°C to +55°C
Humidity: Up to 95%
Storage Temperature: -20°C to +60°C
Humidity: Up to 95%
IP Rating Protection: IP66 front – IP22 rear (EN60529)

Even although the test conditions for bridge units provide for a maximum
operating temperature of 55°C, continuous operation of all electronic
components should, if possible, take place at ambient temperatures of only
25°C. This is a necessary prerequisite for long life and low service costs.

Available Accessories:

HD CMB SX1-A1 1 x Console Mount Kit (3-12mm)
HD CMB SX1-A2 1 x Console Mount Kit (1-12.75mm)
HD CMB SX1-A3 1 x Console Mount Kit (1-12.75mm) – Long screws for easier installation in tight spaces.
HD TMB SX1-B1 1 x Table Mount Bracket
HD VED SX1-A1 1 x VESA Bracket, not EN60945 Tested
HD REM SX1-A1 1 x External Remote Control
HD 17COV SX1-A1 1 x UV Sun Cover

Factory Options:

  • Projected Capacitive Touch Screen (Multitouch, USB interface)
  • Optical Bonding Technology
  • Color Calibrated models (ECDIS)
  • Sunlight readable / High Bright (includes Optical Bonding)

Manual and Data Sheets

Hatteland HD 19T22 MMD-MA1-FAGA 19.0″ MMD ACDC Black GDC Buzzer 119910